Beating the ODDS: Conceptual Innovations Develops Omni-Directional Drive System for the NASA Glenn Research Center.
When your job deals with the challenges of getting to outer space, the products you design and build are far from ordinary. And for that matter, so are the challenges.
At the NASA Glenn Research Center in Cleveland, Ohio, wind tunnel testing is a constant. So is the fact that the fully assembled test articles for certain test facilities can weigh up to 24,000 lbs. Moving these complex builds is certainly no simple task.
Adding to these challenges was the following discovery at the 10×10 Supersonic Wind Tunnel Facility: The load rating for a portion of the floor that these types of hardware were transported over from the buildup area to the test section wasn’t adequate. This was due to excessive point loads that the original casters imposed.
Getting even weight distribution on track.
Somehow the maximum overall weight of the equipment and test article would have to be distributed efficiently. Current constraints required the assembled pieces to be picked up via a drive screw lift mechanism but turned via a motorized tug to get everything into proper position.
This was not an elegant process by any means. Extra manual labor was required to get the test article perfectly aligned in the wind tunnel test section to the point where it could be installed. If a solution to remedy the problem wasn’t found, they could no longer safely move completed test articles to the supersonic wind tunnel test section.
This would mean that test articles would have to be brought up to the wind tunnel test section in smaller, more manageable pieces and then assembled. As a result, the installation would take longer to complete, and fewer tests could be performed in a given calendar year. That is not a best-case scenario, as strict timetables for testing always present numerous challenges like cost.
Omni Directional Drive System
The answer to this dilemma presented itself through the development of the Omni Directional Drive System (ODDS), an innovative platform developed by Conceptual Innovations.
“The process of developing the ODDS System was very seamless,” notes Robert Clark, Mechanical Testing and Facility Operations Engineer with HX5-Sierra LLC at the NASA Glenn Research Center. “We were looking for a turnkey solution which was made possible through Conceptual Innovations.”
The ODDS System features 8 independently powered pods that enable the system to move forward and back, side-to-side, turn-in-place, rotate, and change direction while moving forward.
Each pod is powered through an energy chain. As the wheel turns, the energy chain lengthens to accommodate. The chain also folds on itself when not extended. This innovation allows the pods to move independently or together.
“Conceptual Innovations also helped to re-certify the equipment to its accompanying load ballast weight of 30,000 lbs., which was never a part of the original deliverable,” adds Mr. Clark. “Conceptual Innovations has my utmost respect. I can only hope that myself and others here at the NASA Glenn Research Center would be able to work directly with or be associated with them on a future ODDS type of project.”
For more information, contact Conceptual Innovations at 800.704.1562. To see the ODDS System in action, click on the video below.